You are here: Home» Products & Materials» Packing Series» Graphite Packing» Ramie Packing With Graphite & Oil Impregnation
E-STORE

Ramie Packing With Graphite & Oil Impregnation

Ramie Packing With Graphite & Oil Impregnation

Ramie Packing with graphite & oil impregnation,Square braided construction, graphite coated and mineral oil lubricated throughout.
Ramie Packing with graphite & oil impregnation is mainly used for emulsion, water,oil,applicable to high pressure slurry pump of oil field, hydraulic support in coal mine and emulsion pump, etc.The former fabric-reinforced rubber ring has such disadvantages, such as short life span, frequent changing, and high strength of manpower, which not only blocks the production, influence economic benefits but also pollutes the environment seriously. After the application of Ramie Packing with graphite & oil, the life span was prolonged several months at least or over half a year at most.It doesn’t pollute products. Ramie Packing with graphite & oil needs little maintenance,and high water based packing is easy to install and will not wear the sealing position.

Application:
A medium hard packing which is lubricated and graphited throughout. Extremely low frictional characteristics where minimum shaft wear is essential. Rot resistant and ideal for marine use, handling cold water, brine and cold oils.

Ramie Packing with graphite & oil impregnation Technical Data
Pressure 2MPa
Rotary Pump 15bar
Reciprocating Pump 15bar
Valve 20bar
Temperature 100℃
PH Range 6~8
Linear speed 6m/s
Density 1.25g/cm3
Section Size 3*3mm–100*100mm
Package 5kgs or 10kgs per reel in a box/or as the requirement of the client

E-STORE
Subscribe